PwnCNC

PwnCNC Spindle System

$700.00 USD

Sale Sold out

Shipping calculated at checkout.

Motor 1.5kw 110v ER11 65mm 2-pole 400Hz Air-Cooled 1.5kw 110v ER11 65mm 2-pole 400Hz Water-Cooled 1.5kw 110v ER20 80mm 2-pole 400Hz Air-Cooled 1.5kw 110v ER20 80mm 2-pole 400Hz Water-Cooled 2.2kw 220v ER20 80mm 2-pole 400Hz Air-Cooled 2.2kw 220v ER20 80mm 2-pole 400Hz Water-Cooled 1.5kw 220v ER11 65mm 2-pole 400Hz Air-Cooled (special order) 1.5kw 220v ER11 65mm 2-pole 400Hz Water-Cooled (special order) 2.2kw 220v ER20 80mm 4-pole 800Hz Water-Cooled Metalworking (special order)

RETURN AND REFUND POLICY

View full details

Is the Spindle System Right for You?

Choose the PwnCNC Spindle System if you want our cleanest and most complete spindle-upgrade package. The VFD is installed in a finished PwnCNC enclosure, programmed for the selected spindle motor, and tested before shipment.

This is the best choice for customers who want a finished VFD enclosure, prepared spindle connections, and less wiring work than a component-level spindle kit.

Want the lower-cost DIY option? Choose the PwnCNC Spindle Kit if you are comfortable supplying or configuring the VFD enclosure, wiring layout, cable management, and final installation yourself.

Upgrade from a trim router or basic spindle setup with an enclosed, preconfigured PwnCNC spindle system. Final mounting, controller configuration, grounding, cable routing, cooling, and machine integration remain customer-installed.

Why Choose the PwnCNC Spindle System?

Finished VFD enclosure: The VFD is installed inside a finished PwnCNC enclosure instead of being supplied as a loose component.
Pre-programmed and tested: Each system is configured for the selected spindle motor and tested before shipment.
Configuration-based components: Your motor, controller, power, and cooling selections determine the standard components included with the system.
Less wiring complexity: Critical spindle connections are prepared to reduce the amount of customer wiring required.
Router upgrade path: A strong option for CNC owners ready to move from a trim router to a quieter, smoother, VFD-controlled spindle.

Installation and Compatibility

The PwnCNC Spindle System is a customer-installed product. Customers are responsible for confirming spindle-mount size, available electrical power, controller compatibility, cooling requirements, cable routing, grounding, and any machine-specific modifications before installation.

Controller selection helps PwnCNC supply the appropriate standard control cable or accessory when available, but third-party controller settings, firmware, wiring, and machine behavior remain the customer’s responsibility. PwnCNC cannot guarantee compatibility with undocumented, modified, proprietary, or unsupported third-party equipment.

PwnCNC provides published installation documentation and general product-specific guidance for the PwnCNC components supplied with the system. Support does not include custom electrical engineering, third-party controller diagnosis, machine repair, or certification of a completed installation.

Not Sure Which Standard Configuration to Choose?

Spindle selection depends on your machine, controller, available power, spindle-mount size, cooling preference, and intended use.

Our free review can help identify standard PwnCNC products commonly compatible with the information you provide. It does not include custom machine design, electrical diagnosis, installation planning, or validation of third-party modifications.

Request a Free CNC Upgrade Compatibility Review →